
===V1.10===2019.10.10===
First edition


===V1.11===2019.10.29===
1. When the output is paused, press the menu button to also bring up the channel setting menu.
2. Optimize the problem that some SBUS signals are not recognized.

===V1.12===2020.03.04===
1. Modified the problem that there is no output after restoring the default.
2. Added cursor for manual measurement of servo response speed, which only appears in key mode.
3. Increase the frequency adjustment of the internal signal phase mode and remove the PC option.

===V1.13===2020.07.21===
1. The current display is added to the system settings, and the maximum current and the average current can be switched.

===V2.00===2026.01.10===
1. Ported to V2 mainboard.

===V2.01===2026.07.09===
1. Fixed the low-current test accuracy issue of the small servo.

==================================================

===V1.0===2019.10.10===
һ


===V1.11===2019.10.29===
1,ͣʱ²˵Ҳɵͨò˵
2,ŻSBUSź޷ʶ⡣

===V1.12===2020.03.04===
1,޸ĻָĬϺ⡣
2,ֶӦٶȵĹֻ꣬ڰģʽг֡
3.ڲźŽ׶ģʽƵʵȥPCѡ

===V1.13===2020.07.21===
1,ϵͳӵʾлƽ

===V2.00===2026.01.10===
1,ֲV2塣

===V2.01===2026.07.09===
1,޸С͵Ծ⡣



¹̼QQȺ 858872618


